Full automatic dry slurry production line,dry mix mortar plant for sale
1.Raw Materials Storage System: Silo for storing needed raw materials
2.Lifting & Conveying System: Bucket Elevator, Screw Conveyor
3.Weighing System: depending on different formulas, weighing in proportion accurately
4.Mixing System: Dual-shaft paddle mixer,with 60~180s blending, materials are mixed evenly
5.Packing System: end products are packed by 20/25/50/kg bags, or stored in silos, or delivered by bulk tank truck directly
6.Dust Collection System: collect dust from drying system, weighing system, mixing system, packing system, protect the working and living environment.
7.Control System: Semi-auto/Full-auto Control, convenient for operation and management.
| Model |
Capacity |
Site land |
Manpower |
Packing conditon |
Plant height |
| simple model |
3-5ton/hour |
20m2 |
2-3 person |
automatic packing |
5m |
| semi-automatic |
5-10ton/hour |
50m2 |
3-4 person |
automatic packing |
6-8m |
| full -automatic |
10-40ton/hour |
100m2 |
3-4 person |
automatic packing |
8-15m |
Application of Dry Mortar Production Line
1. Masonry mortar for bricks, stones and other blocks.
This mortar bonding is strong. Masonry mortar has strong plasticity and low shrinkage, which can ensure the stability of the mortar to the greatest extent.
2. Plastering mortar applied on the surface of buildings or building components.
Strong ability to withstand external action. It has sufficient resistance to water flushing. If you want to use plastering in the bathroom or other damp rooms, it is a very good choice.
3. Tile adhesives are mainly used to paste decorative materials such as tiles or floor tiles.
The bonding ability of the tile adhesive is very strong, which can effectively reduce delamination, peeling, avoid hollowing, cracking, etc. Protect the environment without toxic additives.
4. Thermal insulation mortar is a common building material.
It can be used on the surface of buildings to form a thermal insulation layer and play a certain role in thermal insulation. It can be used after adding water, easy and quick. Thermal insulation mortar has stable performance, low shrinkage, and can effectively prevent mortar cracking.
5. Tile grout is used to grouting walls or floors between tiles.
Good adhesion to the edge of the tile. Low shrinkage rate, reduce crack formation. Low water absorption and strong resistance to penetration. It has excellent constructability.
6. Decorative mortar is a kind of mortar that can directly decorate buildings without smooth base or other decorative treatment, and can replace paint or tiles. The colors of decorative mortar are natural and various.
Lower cost and high cost performance. Convenient construction and easy operation. Material safety and environmental protection. Strong adhesion, low water absorption and good air permeability.
7. Self-leveling mortar is used for leveling the base of various floor materials.
No segregation, the mortar has good fluidity and can be leveled automatically within a certain thickness. The self-leveling time is short, and it can dry in a short time. According to your requirements, the formulation can be adjusted to change the bearing capacity of the mortar. Strong adhesion, not easy to layer, not easy to empty.
8. Wall putty mortar used for building coating base leveling.
Save paint usage and reduce project cost. Has strong adhesion and flexibility. Aging resistance, impermeability and moisture resistance. Environmental protection, non-toxic and safe. Good crack resistance and breathability
9. Gypsum joint mortar used for joints of thin plate keel systems such as paper surface gypsum board and cement fiber board.
Audited Supplier 
){kind=link}